Shaping Machine Model 12" Stroke
Specifications :
Capacity | SAT 12 | SAT 18 | SAT 24 | SAT 30 | SAT 32 | SAT 36 |
Lenth of Ram Stroke | 305 | 457 | 610 | 762 | 815 | 915 |
Lenth of Ram | 660 |
990 | 1219 | 1378 | 1610 | 1740 |
Lenth Width Ram Bearing | 660x178 | 762x267 | 914x278 | 1040x279 | 1135x305 | 1190x390 |
Max Minimum Distance from Table to Ram | 257x41 | 407x89 | 457x89 | 508x114 | 500x140 | 521x140 |
Table | ||||||
Working Surface of Table | 306x228 | 407x292 | 483x330 | 610x362 | 380x810 | 457x915 |
Max Table Traval-Horizovtal | 419 | 508 | 610 | 762 | 810 | 870 |
Max Table Traval-vertical | 140 | 330 | 375 | 432 | 390 | 390 |
Angolar Movement of Table on Ether side | 60L 60R | 60L 60R | 60L 60R | 60L 60R | 60L 60R | Fixed |
Tool Head | ||||||
Maximum size of tool Shank Accommodated | 16x22 | 32x16 | 51x21 | 51x21 | 38x21 | 38x21 |
Max. Vertical Travel of Tool Slide | 140 | 150 | 150 | 150 | 180 | 200 |
Max. Swivel of Tool Head | 60L 60R | 60L 60R | 60L 60R | 60L 60R | 60L 60R | 60L 60R |
Speed feeds | ||||||
Dia of Clutch Pulley | 235 | 311 | 311 | 311 | 405 | 405 |
Range of Ram Speed (Stroke Per Minte) | 30, 60, 90 | 17, 25, 50, 75 | 12, 24, 48, 72 | 10, 24, 45, 70 | 12, 25, 40, 67 | 12, 25, 40, 67 |
Dia of Motor Pulley | 76 | 89 | 89 | 89 | 100 | 100 |
Range of Table Feed Per Stroke of Ram | 0.229 | 0.229 | 0.229 | 0.229-0.687 | 0.229-0.687 | 0.229-0.687 |
Range of Tool Head Feed | Hand feed | Hand feed | Hand feed | Hand feed | Hand feed | Hand feed |
Drive Electrical Equipments | ||||||
Phase Electric main Drive Motor | 1.5 HP | 2 HP | 3 HP | 5 HP | 5 HP | 5 HP |
Speed R.P.M | 960 | 960 | 960 | 960 | 960 | 960 |
V-Belt Saction | 8-35 | 8-55 | 8-57 | 8-57 | 8-72 | 8-72 |
Main Switch Starter (Push Botton) | 3.5 AMP | 3.5 AMP | 5 AMP | 15 AMP | 15 AMP | 15 AMP |